Homemade (glass) Bong

#1 (**permalink**) 07-11-2005, 05:03 AM

Well, I am wanting to make a bong out of a pop bottle, which happens to be glass. My problem is im not sure how to cut the glass without cracking it....or what to use as the stem. If anyone has any insight, it is welcomed.

thanks alot guys

corey

Higgy · #2 (**permalink**) 07-11-2005, 05:22 AM

if your really set on doing this, go to home depot and see what they have in the way of glass drillers, i'm sure they make them. as for a stem and bowl, go to your local headshop and get one.

Ars moriendi · #3 (**permalink**) 07-11-2005, 06:43 AM

One site says to use some form of wire wrapped an heated till the end melts then filed down to a point.

Try searching for "diy glass" or similar on google. I found it on some diy craft/automotive/home repair/ect diy site.

LimpinandPimpin · #4 (**permalink**) 07-11-2005, 08:45 AM

Go to any decent hardware store get a glass cutter (preferably diamond tipped) just etch out a circle and push it out. Will take awhile, also if you have a drill there are drill bits made for glass.

I almost did this with an everclear bottle, but I used my pipe instead.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Glass bong	greeneyes420_us	Recreational Marijuana Use	8	11-25-2008 12:24 AM
nice homemade bong	jsquared	Recreational Marijuana Use	15	01-24-2007 05:18 AM
Worried about my health with a homemade bong	DietBong	Recreational Marijuana Use	7	11-14-2004 09:03 PM
Best Homemade Bong	homecroftstoner	Recreational Marijuana Use	2	11-14-2004 06:38 PM
glass bong stems	Cullen	Seasoned Tokers	1	11-30-2003 06:39 AM

Site links

FAQ

Important

Extra

#1 (permalink) 07-11-2005, 05:03 AM
coreybox Guest Posts: n/a	Homemade (glass) Bong Well, I am wanting to make a bong out of a pop bottle, which happens to be glass. My problem is im not sure how to cut the glass without cracking it....or what to use as the stem. If anyone has any insight, it is welcomed. thanks alot guys corey

#2 (permalink) 07-11-2005, 05:22 AM
Higgy Registered User Join Date: Apr 2005 Location: Washington Posts: 610	if your really set on doing this, go to home depot and see what they have in the way of glass drillers, i'm sure they make them. as for a stem and bowl, go to your local headshop and get one. __________________

#3 (permalink) 07-11-2005, 06:43 AM
Ars moriendi Hermione's Slave Join Date: Dec 2004 Posts: 5,758	One site says to use some form of wire wrapped an heated till the end melts then filed down to a point. Try searching for "diy glass" or similar on google. I found it on some diy craft/automotive/home repair/ect diy site.

#4 (permalink) 07-11-2005, 08:45 AM
LimpinandPimpin Drunken Pothead Join Date: Jan 2004 Location: Texas Posts: 620	Go to any decent hardware store get a glass cutter (preferably diamond tipped) just etch out a circle and push it out. Will take awhile, also if you have a drill there are drill bits made for glass. I almost did this with an everclear bottle, but I used my pipe instead. __________________ The Road Goes On Forever and The Party Never Ends Life is a Path...Death Our Destination

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)