Bong Building?

[TheDRYsmoke420]

Okay, I'm a person that usually stays with doobies and BudBombs, but I'm having a party soon and am looking to make a water bong and I need to know how to build one.

All input is appreciated!

[philter]

party eh?
maybe you should make a gravity bong!

cut the very bottom off a two liter...
take the cap and poke a hole in it...stick tin foil through that and make some tiny breathe holes in that
pack that full of broken up bud

put the bottle in water almost up to the top (fill a bucket or sink w/ water)

screw the cap on
light
start pulling the bottle up....

when its full of smoke, take the cap off, put your mouth over the hole and push down

a grav. bong goes through your weeed real fast but you get very high

you could just use a plastic bottle witha pen or straw stuck in it, and a foil piece, or better yet a joint at the end

[callow]

here's a plan for a real nice one that I just built. the first and most important piece is a slide...it's best if you buy one but you can build one for pretty cheap. anyway...

Materials:

1 - 10-foot long peice of 1.5" schedule 40 PVC piping
1 - 1.5" PVC Y joint (actually looks like a straight piece with a 45 degree addition
2 - 1.5" PVC Caps


first thing you need to do is cut 3 pieces of the PVC pipe - one long one as a shaft, and 2 small pieces, one smaller than the other. (diagram pc 1: ======= pc 2: ==== pc 3: ==)

take the Y joint and stick pc 2 on the bottom. Stick a cap on that.

take pc 3 and stick it in the part that juts out on an angle. Cap that. Drill a hole though this cap that will fit your slide snugly. Take pc 1 and stick it in the last part of the bong. Drill a hole somewhere along the shaft as a carb. Fill with water and enjoy.

[henrx]

Why not buy one... It'll work lots betterer than anything you can build!

[TheDRYsmoke420]

Im a little underage to hold a credit card to buy it online (damn these stupid laws!)

[crazybardude]

I have lots of experience in a very similar situation to yours, so here is one of my favourite quick bong-fixes that will batter you more than a cod in Poole. Behold the basic beauty of the shottie bong (or joint bong) Its real powerful and you can knock one out in 3 minutes.

i)Simply take any bottle (500ml - 1ltr work best, strong bottles are also prefferable) and burn a small hole with a cigarette into the bottle roughly 1/4 of the way up (or lower).

ii) Push a hollow pen tube (biro) through the hole in the bottle, so that one end of the pen rests roughly in the center of the bottle, pointing down, e.g:

[]
\[]
\]
[]

iii) Pour water to submerge the pen completely, then burn another hole about 5cm above the water line, to use as a rush (or shotgun, call it what you will).

iv) Now roll a fat reefer, making sure that the roach fits into the pen nicely. Now cream up a phat brick and zoom it down into your throat. Man, I need a bong now!

[KGB_Quietus]

well using the directions I just posted here -> http://forum.grasscity.com/showthrea...&threadid=5672

make that pipe, then using the directions crazybardude posted. but instead of shoving a empty pen shove the pipe made outa a pen. I also use a piece of gum and push it around the hole the pen goes through to create a better vacuum inside the bottle. works great!

[TheDRYsmoke420]

Yeah! Finally finished, and am enjoying my bong, thanx all!
It also doubles as a cool lookin drinkin bottle!

[TheDRYsmoke420]

Sorry I forgot to post the pic, here it is! BTW, if anyone is wondering, thats coke (origional formula, lol) in the bong, not weed infested water. LMFAO!

[TheDRYsmoke420]

I hacked the little mother fuckers username, lol! And he said he was a hacker? FAG!

[cradleofganja]

lmfao

[Unknown]

Thats damn hilarious!

[overgrowray]

nice bong i've made a fuck load of homemade ones. i try to put more thought into them now then i used to. I made one last year when i was on probation that i still have, and still havent used it. i even painted it. i'll post pics of it sometime. i wanna a good 2 or 4 person hooka next time. i just don't like using plastic, when you use glass it makes it look like you spent more time on it then you really did. I used to have a drill bit for glass but it snapped, i really need another one.

i always wanted to be a hacker but im too lazy to sit down and learn how or know were to go to learn how. I dunno i have a lot of time to fuck with computers and do shit like that but i'd rather sleep.

[Unknown]

Lol, its easy as hell, most peeps around where i live are little "script kiddies". But the "Origional" DrySmoke probably knew absolutely nothing about hacking... as in the words of his dominator "FAG!"

[cradleofganja]

someone probably just used brute force on his s/n