StrangeTimes's Howto: Make your own double chambered bong

[StrangeTimes]

StrangeTimes's Homemade Double Filtration Bong

Welcome! Tonight we're going to be making our own double filtration bong. Have you ever wanted one of those fancy RooR's, or Xhales, but don't have the cash? Well here's how!

Step one- Find two Gatorade Bottles. These are the standard size that they sell in vending machines, and places like that. I just sort of acquire Gatorade bottles, so this is a good use for them. You're going to need two, and no flavor doesn't matter for the wise guys.




Step two- Cut the bottom off of one of the bottles, right at the seam, where the vertical indentations begin. This will be the bottle that goes on top.











Step Three- You're going to need to make the crucial part. This is the part that will allow you to filter the smoke twice. Take a Gatorade cap and drill three holes in a triangular pattern, and fit three full length straws in it. This will go in the lower bottle.








Step Four-

Next you are going to make the stem. Cut a hole in the bottom of the bottle about an inch or two from the bottom. Take a pen (or in my case a straw, I was out of pens) and insert it into the hole (giggity). Then, pour candle wax around it to form a watertight seal.








Step Five- Place the cut bottle on top of the bottle which we just put the stem in. Pour candle wax around the seal, and be sure to use a lot, you're going to have to keep a whole bunch of water from seeping out. Also be sure to put some water in the bottom level, as it's going to be pretty hard to reach after you seal them together






It may not be pretty, but it definitely works.

Step Six- Add a socket or bowl of your choice to the pen / straw. You need something to actually smoke out of, right?







And yes...she holds water!







I decided to break her in with some Lemon Kush-










If you have any questions or comments, don't hesitate to ask

StrangeTimes

[Shark-Bite]

nice job! great pics.

[CitySmoker420]

great guide man! +rep! may i add a few sugestions.... i sugest adding another bottle so that there is no splashback... also instead of a straw as a donwstem use a pen tube/radio antenna/lighter tube because then its more durable or diffused... but GREAT GUIDE MAN +rep!

[bwood]

Duct Tape eliminates the use of wax. Most people got duct tape so thats what I use if I gotta make a bong.

[Kat3]

If you put a carb on the bottom bottle it would make it easier to fill up the bottom chamber and you could clear the smoke out of the bong.

[StrangeTimes]

Originally Posted by bwood

Duct Tape eliminates the use of wax. Most people got duct tape so thats what I use if I gotta make a bong.

I tried duct tape and it didn't get a very good seal because the Gatorade bottle has a bunch of bumps

And I had a carb up top, it worked marvelously

[CitySmoker420]

Nay. electrical tape and hotglue is the best

[sensi_master]

i had one where i cut the tops off both bottles and separated the chambers with like a plastic shield from one of the tops it worked and was pretty cool

+rep yours is way better than mine was probably the same goes with that ganj too hah

[J-Darsh]

Very nice the only thing that i would say is to use something other than wax for those seals. it doesn't loook to sturdy and prob wouldn t last