Making a homemade

[xxsoonerxx]

Hey guys I have made a few shitty homemade bongs like I assume everyone else has. I am blazed and I wanna make a REALLY nice homemade...Any ideas suggestions...should I put a percolator?

[4twizzy.]

whats available to you?

easiest would be ....

600ml bottle
Garden hose & a cone peice of course.

[xxsoonerxx]

A bunch of like 24 oz. bottles, some sockets, I do have some garden hose I think I could use...and a bunch of other shit everyone uses to make homemades.

I want a homemade that just straight rips big and smooth, and i wanna be able to use it multiple times..

I made one the other day out of a sunkist bottle, I used I hose connecter and a garden hose filter as the bowl (worked wonders) and i got some thin tubing for like a hose as a mouth piece...It sucked lol....

IDK I just want to make a NICE homemade so some instructions from someone would be great. Thanks in advance

[4twizzy.]

for homemades i go basic

just get ur plastic bottle, get a lighter, & ur hose


1. use ur lighter to burn a lil hole in the bottle, as the hole gets to about .5cm stop the fire and jam the hose in there, itll ensure its air tight and fits perfectly.

2. (wait for the plastic has cooled and fitted perfectly and in place) once ur hose is in place, all you gotta do is sort out a cone peice into the pipe.

3. if you want to go any further you can do the same process by adding another chamber or what ever you really want. but by doing so your just complicating shit further, some of the best home mades ive had were just

a bottle, a hose & the cone peice in the hose.

also the better quality the plastic the better it'll last, ive had a home made for at least a month or so and it works fuckin sick, i just clean the cone peice every now and again and of course change the water.


hope it goes well for you man & i was able to help. post up pics when ur done to see how u go.

[xxsoonerxx]

Originally Posted by 4twizzy.

for homemades i go basic

just get ur plastic bottle, get a lighter, & ur hose


1. use ur lighter to burn a lil hole in the bottle, as the hole gets to about .5cm stop the fire and jam the hose in there, itll ensure its air tight and fits perfectly.

2. (wait for the plastic has cooled and fitted perfectly and in place) once ur hose is in place, all you gotta do is sort out a cone peice into the pipe.

3. if you want to go any further you can do the same process by adding another chamber or what ever you really want. but by doing so your just complicating shit further, some of the best home mades ive had were just

a bottle, a hose & the cone peice in the hose.

also the better quality the plastic the better it'll last, ive had a home made for at least a month or so and it works fuckin sick, i just clean the cone peice every now and again and of course change the water.


hope it goes well for you man & i was able to help. post up pics when ur done to see how u go.

Alright man, thanks you were a lot of help, and I will post results when I am finished...

EDIT: I got an idea, you know those new Mountain Dew metal bottles with the sweet designs on them? They are like the Bud Light ones, just a soda twin lol..anyway I will cut a whole in the side, use a gutted pen, and make my bowl out of a socket and lil screen. The bowl will slide into the gutted out pen, so I can clear the smoke after a hit..I will duct tape it and make it airtight. Should hit pretty good.

EDIT: oh and I will still make the one suggested.

[bongrubber]

heres kind of a shitty one i made a little while back

[xxsoonerxx]

Originally Posted by bongrubber

heres kind of a shitty one i made a little while back

Better than some of mine for sure! It really ain't bad at all dude I actually kind of like the design..How does it hit?

[bongrubber]

it hit alright, i just wanted to try something double chamber
its long been in the garbage though

[xxsoonerxx]

Originally Posted by bongrubber

it hit alright, i just wanted to try something double chamber
its long been in the garbage though

Alright, I am really new to bongs and stuff, so what is the purpose of multiple chambers? I would really like to try to make one if it is worth it.

[bongrubber]

im pretty sure that multi-chambers just makes it a smoother hit by filtering out some of the shitty stuff from mj that u dont want to smoke, like less tar and shit like that

[4twizzy.]

after hearing about homemades, i had to get upto something myself

nothing big just reading myself for after my exams were planning a mass sesh with gravs involved so i decided to make a sick grav peice.




underside:


that shit is sealed tight cant wait 12 days till my t break/exams finish.

[xxsoonerxx]

Originally Posted by 4twizzy.

after hearing about homemades, i had to get upto something myself

nothing big just reading myself for after my exams were planning a mass sesh with gravs involved so i decided to make a sick grav peice.




underside:


that shit is sealed tight cant wait 12 days till my t break/exams finish.

Nice bro, Nice! lol

Anyway I threw out the idea of a "nice" homemade and ended up with this...

A twenty-four oz. Mt. Dew bottle
A 2 liter Mt. Dew bottle
A gutted pen
another gutted pen(cil) with a bottle cap as the bowl and the screen is like a faucet filter, this works as the slide...one fits inside the other it is air tight and everything..
some elect. tape and all that homemade bs people use.

What I ended up with is the two bottles connected at the mid-bottom by a gutted pen (made it airtight) then rigged it to where both bottles are pretty stable held together.
I screwed the lid on the 24 oz. way way tight, I am still deciding where to put the bowl at...I mean should I put it to where it is submerged in the water on the inside of the bottle? Sorry I am kind of a noob...anyway I am gonna take the hit off the opening of the 2 liter...

Anyway just bullshittin around lol...comments and some help would be nice thanks lol

[4twizzy.]

would u be able to take a pic, its kinda hard to imagine lol

[xxsoonerxx]

Damn, I tried to put a little pic I drew up on paint to try to explain it better!!! It didn't work I am so mad lol

anyway here goes I will try again..

Imagina A bottle with bongwater about a 1/4 full...Image a Bottle cap connected to a gutted pen, thats the bowl and some stem thing I guess and imagine a hole cut in the bottle with the stem going down into the bong water...(therefore the bowl would be on the outside with its 4 inch long stem coming through the side of the bottle submerged in water.

Would that be okay to do? Or is it pointless?

[4twizzy.]

ok so youve got

2 bottles connected by a gutted pen

with a downsteam + bottle cap for cone peice coming outve the 24oz bottle correct?