clean your grinder and smoke it

[GoodbyeBlueSky]

Hi, I have a 75mm staged grinder with a screen collecting kief. After smoking all my weed, I clean my grinder over a white paper sheet and with a brush, I dust it all on the sheet and make hash from this. Then I took isopropyl alcohol 99%, and pour a small layer at the bottom of grinder and with another brush I clean all stages of my grinder over the bottom layer. Then at the bottom, all the thc left from the grinder is mixed with the alcohol. I then dried it over a small fan. after 15 minutes, I took an x-acto cutter and remove all the good stuff and smoke it. I did sure it didn't smell alcohol before and played with it to form a little nug. Now I would like to know, now that I smoke it ( it was the size of a broken pencil tip) I must say I am a little high so it worked, Whats you people from the city thinking about this.

This photo is not mine but the grinder is looking pretty much the same.

[King Z]

Makes sense. Alcohol has a high vapor pressure; therefore, it evaporates quickly leaving you with just the kief.

+rep for ingenuity

[bongduck]

good idea for cleaning your grinder

i usually just bang it out and scrape it a bet to get most of the kief, mine is never completely clean

[DrBlunt]

That grinder looks pretty much exactly like mine . Stuff gets stuck in it occasionally, when its really sticky, but it can grind alot of weed very quickly.

The alcohol is a good idea, but I don't know if you'd be left with that much really. Scraping it would get 90% of whatever is in there most times.

[Digit]

Originally Posted by GoodbyeBlueSky

Hi, I have a 75mm staged grinder with a screen collecting kief. After smoking all my weed, I clean my grinder over a white paper sheet and with a brush, I dust it all on the sheet and make hash from this. Then I took isopropyl alcohol 99%, and pour a small layer at the bottom of grinder and with another brush I clean all stages of my grinder over the bottom layer. Then at the bottom, all the thc left from the grinder is mixed with the alcohol. I then dried it over a small fan. after 15 minutes, I took an x-acto cutter and remove all the good stuff and smoke it. I did sure it didn't smell alcohol before and played with it to form a little nug. Now I would like to know, now that I smoke it ( it was the size of a broken pencil tip) I must say I am a little high so it worked, Whats you people from the city thinking about this.

This photo is not mine but the grinder is looking pretty much the same.

cool.

i just get dedicated n scritchy scratchy at mine. it has no collection resevoir. just a classic plastic skewed pyramidal toothed job.

good shit.




medical grade.


..... as long as i dont scratch too hard n get plastic.