how do i make a water bong

[lostsurfer]

ive tried twice unsuccessfully. anybody have any tips especially for the pipe part cuz thats really the part thats giving me trouble. i poked a hole in a water bottle, put an empty pen in so its sitting in water, and sealed the opening but i dont know what do next. help?

[create]

mmmmmm, if you don't know how even make something as simple as a water bong, maybe you shouldn't be smoking......yeah, just add a screen and pot and light it and hit from the top of the water bottle.....

[new_age_hippy]

Add a carb, a bowl, a screen, and you're good.

[lostsurfer]

i dont even know what screen is lol. anyways i dont know what to make them out of i guess i should have said. i tried aluminum foil but it didnt work too well.

[new_age_hippy]

Originally Posted by lostsurfer

i dont even know what screen is lol. anyways i dont know what to make them out of i guess i should have said. i tried aluminum foil but it didnt work too well.

You can buy them at smoke shops. They're just mesh screens to prevent pot from falling into the bong. You could probably find a fine grade screen and use that from a hardware store or something.

[create]

learn how to roll joints and blunts..they only cost 50 cents to a dolla

hmm, yeah most people use foil as a bowl.. and like newagehippy said don't forget the carb.. place it on the opposite side as the bowl, so you can easily let off when your holding it.

[lostsurfer]

haha dude you should see a "joint" when i roll them. im not very good with my hands, except with a guitar...im guessing just using more foil will work?

[Evilpig]

Haha just buy one... nub

[debauch]

Originally Posted by new_age_hippy

You can buy them at smoke shops. They're just mesh screens to prevent pot from falling into the bong. You could probably find a fine grade screen and use that from a hardware store or something.

if your going to go get screens at a smoke shop, why not just buy a real piece?

[new_age_hippy]

Originally Posted by debauch

if your going to go get screens at a smoke shop, why not just buy a real piece?

True, but sometimes smoke shops only sell spoons, atleast some around here do. Others sometimes only sell glass, which can be alittle costly for some people.

[debauch]

ive never been in a shop that didnt have at least one 20$ water piece.

[shackleford]

just get a 2L bottle a bic pen and a socket thatll fit onto the pen and a small piece of mesh screen like window screen will work. burn 2 holes with the lighter one for a carb and one for the pen. the one for the pen get the plastic hot but not a hole and push the pen through and dont wiggle it around. if done properly itll be air tight as is. put the hole for the pen about 1/3 the way up from the bottom of the bottle. and the carb wherever your non lighter hand will be holding it. it must be above the pen hole. put the screen in the socket and put that on the pen. if you get a tapered socket the work better but arent that big. and fill the bottle with water about 1in-1cm below the hole where the pen is. and then add weed to the socket and blaze the bastard. you might be better off with a waterfall thoug. and if you put a screen on the end of the pen in the water the smoke should be alot easier on your lungs since smaller bubbles and better filtration almost like an airstone. and us the coldest water possible maybe even put the bottle in the fridge with water after youve got it buit til its cold. the smoke wont be so hot and yet again easier on the lungs.

[weigner420]

If you wana do something easy, than get the water bottle, some electrical tape or duck tape, a small mag-light, or a metal flashlight similar, best thing ever. Take out the flashlights internals, put a screen in, and if you dont have one most sink faucets have on that can be taken out with the faucets head and then boil it to get all the stuff off. Stick the flashlight in the hole on the water bottle so the botem of the flashlight is touching the bottles bottem. And seal the spot on the bottle where the light goes in with the tape, has to be air tight. Head up a higher spot on the bottle, with a pen make a carb with the semi melted plastic. And whoopty doo you got a hard hittin bong.

[Grim_X_Reefer]

If you posted a pic, we might be able to diagnose the problem a lot easier.