smoking and usage

h3x · #1 (**permalink**) 06-18-2006, 09:35 AM

There's a window that has been boarded up with Sheet Rock, followed by Insulation and another slab of Sheet Rock. However, from outside the light still shines through the sheet rock.

What could one do to solve this problem? Would aluminum foil work?

Any help is greatly appreciated.

grow buddy · #2 (**permalink**) 06-19-2006, 03:47 AM

Just use a thin board of plywood and use caulking around the sides.

TheTsunami · #3 (**permalink**) 06-19-2006, 05:23 AM

i would try just taping the edges around it.. or use caulk like he said

h3x · #4 (**permalink**) 06-19-2006, 08:56 PM

The light is shining right through the sheet rock.

DataBass · #5 (**permalink**) 06-20-2006, 12:59 AM

You must live next to a nuclear power plant where the squirrels have x-ray vision too. Either the sun is really bright or the sheetrock is really porous. I'd go with the heavy-duty foil.

h3x · #6 (**permalink**) 06-20-2006, 03:03 AM

Well, I got contractor bags (heavy duty black garbage bags) and put two folded layers all along the wall and stapled aluminum foil on top of that.

budboybubby06 · #7 (**permalink**) 06-20-2006, 03:08 PM

if this window is in view to the public dont put foil on it as it looks sus.. put some dark curtains up and screw a piece of plywood across the back.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Beginner's Guide to Growing Marijuana	superjoint	Absolute Beginners	21	08-23-2008 07:10 AM
For all newbies	sidious	General Indoor Growing	18	07-01-2007 07:21 PM
beginers guide to growing weed (long post)	trippin over it	Absolute Beginners	20	02-25-2006 04:36 PM
Prob HPS light	fat freddy	General Indoor Growing	5	02-19-2006 09:29 PM

smoking and usage

chill out zone

marijuana growing

marijuana news and discussions

web site feedback

Site links

FAQ

Important

Extra

#1 (permalink) 06-18-2006, 09:35 AM
h3x Registered User Join Date: May 2006 Posts: 4	Light leaks There's a window that has been boarded up with Sheet Rock, followed by Insulation and another slab of Sheet Rock. However, from outside the light still shines through the sheet rock. What could one do to solve this problem? Would aluminum foil work? Any help is greatly appreciated.

#2 (permalink) 06-19-2006, 03:47 AM
grow buddy Registered User Join Date: Jun 2006 Posts: 24	Just use a thin board of plywood and use caulking around the sides.

#3 (permalink) 06-19-2006, 05:23 AM
TheTsunami Registered User Join Date: May 2006 Posts: 199	i would try just taping the edges around it.. or use caulk like he said

#4 (permalink) 06-19-2006, 08:56 PM
h3x Registered User Join Date: May 2006 Posts: 4	The light is shining right through the sheet rock.

#5 (permalink) 06-20-2006, 12:59 AM
DataBass Armon Tanzarian Join Date: Aug 2005 Location: Pacific Northwest Posts: 141	You must live next to a nuclear power plant where the squirrels have x-ray vision too. Either the sun is really bright or the sheetrock is really porous. I'd go with the heavy-duty foil.

#6 (permalink) 06-20-2006, 03:03 AM
h3x Registered User Join Date: May 2006 Posts: 4	Well, I got contractor bags (heavy duty black garbage bags) and put two folded layers all along the wall and stapled aluminum foil on top of that.

#7 (permalink) 06-20-2006, 03:08 PM
budboybubby06 Registered User Join Date: Jun 2006 Posts: 9	if this window is in view to the public dont put foil on it as it looks sus.. put some dark curtains up and screw a piece of plywood across the back.

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)