smoking and usage

enevitable · #1 (**permalink**) 07-14-2008, 11:43 PM

Here is an exported shot from SketchUp, including imperial dimensions
http://s4.tinypic.com/206mmaw.jpg
Top left is electrical chamber, below is mother, and on bottom is storage

My questions are as follows:

1. Is the mother chamber adequate in depth to support a mother and a few clones?
1a. If not, would my best course of action be separating the mother chamber into 2 chambers?

2. Any way to optimize my space anymore? Would you do anything differently?

Background information to assist:

Method: DWC
Plants: 2
Light 400w

Any other questions that would further assist let me know, wanting to get as many professional opinions or suggestions as possible.

screwdababylon! · #2 (**permalink**) 07-15-2008, 12:31 AM

i think u can fit mom and clones there
just be creative)
i love to experiment with small DWCs
all over the place

Orga_Nerd · #3 (**permalink**) 07-16-2008, 05:33 PM

That looks like a good start!

I am going to use a space that is 12" x 16" for 2 mothers and clones. so i think you should be ok with the amount of space you have.
I would suggest mounting a shelf to the side or back for your clones. Gives the mothers more room and puts clones closer to the lights.

Good luck!

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
grow box design guide	gr0wer	Grow Room Design/Setup	52	09-16-2008 06:39 PM
advice on clone cab cfl lighting and design	mangochut	Grow Room Design/Setup	0	04-16-2007 03:18 PM
Getting started.	blazing llama	General Indoor Growing	4	03-09-2007 12:42 PM
Hello - some advice and opinions needed!!	DrCrack	General Indoor Growing	2	04-20-2006 10:23 AM
Best Wood for Box and General Design?	777Budz	Grow Room Design/Setup	2	09-12-2005 06:55 PM

smoking and usage

chill out zone

marijuana growing

marijuana news and discussions

web site feedback

Site links

FAQ

Important

Extra

#1 (permalink) 07-14-2008, 11:43 PM
enevitable food tv for life mayng Join Date: Nov 2006 Location: Land of Oz Posts: 2,093	Box design advice needed- Mother Chamber Here is an exported shot from SketchUp, including imperial dimensions http://s4.tinypic.com/206mmaw.jpg Top left is electrical chamber, below is mother, and on bottom is storage My questions are as follows: 1. Is the mother chamber adequate in depth to support a mother and a few clones? 1a. If not, would my best course of action be separating the mother chamber into 2 chambers? 2. Any way to optimize my space anymore? Would you do anything differently? Background information to assist: Method: DWC Plants: 2 Light 400w Any other questions that would further assist let me know, wanting to get as many professional opinions or suggestions as possible. __________________

#2 (permalink) 07-15-2008, 12:31 AM
screwdababylon! bomboclata Join Date: Dec 2007 Location: behind the scene Posts: 1,643	i think u can fit mom and clones there just be creative) i love to experiment with small DWCs all over the place __________________ ONGOING GROW (WW+THAI HAZE SKUNK) MY CAB

#3 (permalink) 07-16-2008, 05:33 PM
Orga_Nerd Registered User Join Date: Jul 2008 Posts: 26	That looks like a good start! I am going to use a space that is 12" x 16" for 2 mothers and clones. so i think you should be ok with the amount of space you have. I would suggest mounting a shelf to the side or back for your clones. Gives the mothers more room and puts clones closer to the lights. Good luck!

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)