Mother/Clone (CFL Area) and 2x 600 watt (HPS) Main room - Prints/Photo's Included.

[mordgrow]

pressurize it and see what happens looks like you might have exactly what I dream of, a vent to the roof pre installed

good luck with that I've tryed to use pre existing stuff before and just flooded my house with flowering bud smell,... it was strong to say the least...

[Merfolk]

Didnt even think about it going to the roof, thought it would just throw all my bud smell throughout my house haha, going to hook up or try too, my exhaust, pics soon!

[Merfolk]

So finished my Exhaust Today, going to hook up to the Heater and see what happens, i hope its all good!


Take a look!

This is a Stanley blower, i bought for 35 bucks, according to other threads, on high it pushes 430 CFM, but i noticed a big change when i moded this thing..

[Merfolk]

Order Confirmed -


http://www.htgsupply.com/viewproduct...roductID=47929 For Mothers

Next is 600 watter

[Merfolk]

Insulated, and covered my basement today - found a few more spots for exhausting out or Intake, dont know, any input?


Rather be real confident in my exhaust system before i make any moves.


If you look behind that pipe ( fitting ) you'll see what looks to be a piece of plywood, its just a screen i think, and i uploaded the pictures from the outside, could i exhaust out of this?

God i hate spiders...

[enevitable]

yo you should do LED's like the scientist
itd take a week to solder that many panels, but youd save a whole lot of power and have to deal with a whole lot less heat

+ its cool as hell

[MonkeyHouseRock]

Hey bud, I got that same setup from htg and it is great EXCEPT FOR THE GROWBRIGHT bulb. My growbright bulb burnt out after 3 days. The owner of htg told me he had many problems with those bulbs. I have a sunmaster bulb fro them that ive been using for awhile now with no problems. Just a heads up. Also, your growroom looks great, cant wait to see it producing!

[Merfolk]

They gave you that bulb for free right? and isnt it like a 50$ upgrade? guess i should pray it blows! haha

Still need to figure out my Ventilation issue, i know this will be the key to my grow, im just worried that my BLOWER wont work with a carbon scrubber? ill need the air to suck?


Still researching on this matter, any helps/tips would be great!

[MonkeyHouseRock]

Yeah, the upgrade bulb was free when my growbright burnt out. The dude actually sent me the Sunmaster bulb the day I called him, without even getting my old bulb back.

You should not need to suck any air in by means of fans, as long as you create negative pressure in the room.

[MonkeyHouseRock]

you want to pull air through your carbon. Just connect the carbon filter to the intake side of the blower, duct the exhaust side of the blower to a duct going outside.

[Merfolk]

You mean MOD both sides? ive seen both done, just not on ONE blower, haha! =) this wont strain the poor blower?


ive read alot of the blower, never came across both the intake/exhaust being modded, but i could have missed it, that or i didnt read all 30 pages haha.



edit: If i dont section off my flower room, which id rather not do, but ofcourse if i had too.....

Smell like many of said will be a big issue - i guess really, only time will tell =)!

[Merfolk]

So i bascially finished my Aero cloner, i bought 360 degree misters

waiting to see what im gonna do to put them in, then cut the holes out!


New project is to build a good sturdy table to put my mother's on..

[Merfolk]

May i might add, no leaks!, been running it for a good 4 hours, not a drop.

Where can i find those black net pot things alot of people like to use?


I dont have any hydro store near me.. looked around, ill look harder.


Edit: 18 Gallon tank - 350 GPH i believe cost about 60 bucks to make. pump of course was the most..

[KingJ]

lookin good i like your setup

[Dewave]

Originally Posted by Merfolk

May i might add, no leaks!, been running it for a good 4 hours, not a drop.

Where can i find those black net pot things alot of people like to use?


I dont have any hydro store near me.. looked around, ill look harder.


Edit: 18 Gallon tank - 350 GPH i believe cost about 60 bucks to make. pump of course was the most..

Here's a cheap way to do it instead of net pots that works great for me.... buy jarring lids for pickling jars aka mason jars, they come in 2 size small and large mouth, your choice.... Its not the lid ya want but the band that screws on the jar.... turn it up side down and place it on the rubbermaid lid, out line the inner hole and cut that out. Then silicone that band over that hole. Next buy from walmart those camping mats that go under your sleeping bag,,, they are 1/2 inch neoprene,,, cut out circles to fit inside the band and make 1 slit to center of that circle and your done