smoking and usage

joxter · #1 (**permalink**) 01-19-2008, 10:06 AM

I'm just kinda bored so i thought i put up some pictures of my new, almost finished flower room.
oh and keep in mind i was on a budget, and have only a drill, screw driver, mini jig saw, and some screws. and it was a very small/tight spot to build in.

this is the floor board, its raised off the ground about a quarter inch so air can get under there and come up through the four passive intake holes, which are lined with activated carbon filter pieces. just my attempt to somewhat filter/clean the air before it reaches my ladies. it's 45" by 4' and 6' tall.

one wall up.

wall number 2

and this is where i had to stop last night.

that big hole will be the door, all thats left to do is get these things installed and get the door fitted on there.

1000w HPS

and a couple of these with some cheap yet decent duct style fans i picked up at my local hydro store, i tested them against the cheap home depot ones, and the ones from the grow shop were pretty much twice as good/powerful as the ones from home depot.

so thats gonna be my flower room, cant wait. i am hopefully going to finish tomorrow. to get some of my babies in there

hpi · #2 (**permalink**) 01-19-2008, 11:18 AM

And they say pot smokers fail.

Looks nice man.

screwdababylon! · #3 (**permalink**) 01-21-2008, 12:18 AM

post more pics
good luck

fb420 · #4 (**permalink**) 01-21-2008, 01:31 AM

Could you post how you built the box? Where did you get or how did you make the frame.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Absolute Newbie's Absolute First Time	gonejah17	Grow Journals	1217	07-19-2008 12:46 AM
I've had a potential grow room all along...	geetardude	Grow Room Design/Setup	7	09-08-2007 12:52 AM
What would you do? (Read for free beer and titties)	tony clifton	General Indoor Growing	3	08-17-2007 07:06 AM
Getting started.	blazing llama	General Indoor Growing	4	03-09-2007 12:42 PM
My ventilation set up for my grow room	bigstickybuds81	Grow Room Design/Setup	2	06-01-2006 04:08 PM

smoking and usage

chill out zone

marijuana growing

marijuana news and discussions

web site feedback

Site links

FAQ

Important

Extra

#1 (permalink) 01-19-2008, 10:06 AM
joxter ahh, medication Join Date: May 2007 Location: NW Posts: 806	my new flower room, well almost I'm just kinda bored so i thought i put up some pictures of my new, almost finished flower room. oh and keep in mind i was on a budget, and have only a drill, screw driver, mini jig saw, and some screws. and it was a very small/tight spot to build in. this is the floor board, its raised off the ground about a quarter inch so air can get under there and come up through the four passive intake holes, which are lined with activated carbon filter pieces. just my attempt to somewhat filter/clean the air before it reaches my ladies. it's 45" by 4' and 6' tall. one wall up. wall number 2 and this is where i had to stop last night. that big hole will be the door, all thats left to do is get these things installed and get the door fitted on there. 1000w HPS and a couple of these with some cheap yet decent duct style fans i picked up at my local hydro store, i tested them against the cheap home depot ones, and the ones from the grow shop were pretty much twice as good/powerful as the ones from home depot. so thats gonna be my flower room, cant wait. i am hopefully going to finish tomorrow. to get some of my babies in there __________________ <--- MMJ one of my new set ups! http://forum.grasscity.com/general-i...new-setup.html check out my journal if ya get a chance, http://forum.grasscity.com/grow-jour...ower-room.html Last edited by joxter; 01-19-2008 at 10:08 AM.

#2 (permalink) 01-19-2008, 11:18 AM
hpi Banned Join Date: Dec 2007 Location: Montreal, Quebec Canada Posts: 1,305	And they say pot smokers fail. Looks nice man.

#3 (permalink) 01-21-2008, 12:18 AM
screwdababylon! bomboclata Join Date: Dec 2007 Location: behind the scene Posts: 1,647	post more pics good luck __________________ ONGOING GROW (WW+THAI HAZE SKUNK) MY CAB

#4 (permalink) 01-21-2008, 01:31 AM
fb420 Registered User Join Date: Mar 2006 Location: Fairbanks, Alaska Posts: 204	Could you post how you built the box? Where did you get or how did you make the frame.

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)