smoking and usage

wozerishere · #1 (**permalink**) 08-25-2007, 12:07 PM

HI I AM STARTING A DIARY OF MY SNOW WHITE GROW I ALREADY HAVE SEVEN OF THESE BABYS 5 WEKS INTO FLOWERING AND THERE LOOKING NICE BUT I Hve just bought some new equiptment and and are starting a new grow,
equiptment is as follows:
autopot 10 pot system
2 250w hps lights
on light spinner {slowley roatates lights}
got the enviroment now to make my babies happy also picked up one of them areophonic cloners
does any one also no the correct ph for me to maintain for a coco grow as i havent grown coco befor or is there a better medium to use in the auto pots because iv heard alot about them overwatering but i was reasured by the guy in the shop that these are the new improved ones with a new smart valve to stop overwatering .
pictures will be posted as i go along.

methaneorange · #2 (**permalink**) 08-25-2007, 10:15 PM

If you're not able to get a good reply on this site. I see that icmag.com has an actual forum for coco coir growers that is pretty active. Would definitely check that out if I was in your place.

wozerishere · #3 (**permalink**) 08-25-2007, 11:38 PM

i have now changed my mind and bought a few bags of BioBizz PreMix soil byt the looks of it it looks to be alryt stuff hopeing for some serious growth this time as my other plants are only small just over a foot is the strain naturly small and bushy as i vedged for a good month.

psionblue · #4 (**permalink**) 08-26-2007, 10:15 AM

if you are using an autopot, make sure you out abount an inch of perlite at the bottom of the pot.

wozerishere · #5 (**permalink**) 08-26-2007, 11:34 PM

how cum the perlite is needed to stop the plants soaking too much water up like a wick iv herd alot about overwater problems but iv been told other wise by the shop that the new smark valves do not overwater:s iv got the room set up not and have placed my 7 hand watered soil plants and two clones into 2 of the autopots would you advise using rockwool on cloned on a soil medium and waht sould i mantain my ph at its 6.5 at the moment

psionblue · #6 (**permalink**) 08-27-2007, 09:45 PM

Perlite helps drain and acts as a filter to the soil so it does not come out of the bottom. I also use root control fabric at the very bottom to prevent root clogs.

The autopot instuctions online call for the perlite at the bottom. In soil I am running 6.5 - 6.7 in the autpots. My pots are very small (I made my own autopot system w/ the smartvalve) so I keep my nutes pretty high. So far so good. I don't put my plants in the autopot system until they are about 2-3" tall or so and then they are moved into 2.4 liter pots in the autopot trays. I have 2 plants per valve.

i am going to coco for my next grow. It should be interesting.

I don't know anything about rockwool, but do use rapid rooter and transplant those into soil. Can't be much different.

One last thing, make sure your feed every day at 1/3 or 1/2 strength and work your way up. Also, put an airstone or pump or both in your reservoir to keep things circulated and aerated. I use both. Also, flush every 2-3 weeks to avoid salt buildup.

good luck!

wozerishere · #7 (**permalink**) 08-28-2007, 02:59 PM

how long do the cuttings usualy talk to root in aerophonic prop and what addatives do you recomend and what is the best way to remove powder mildew with out the chemicals as i am 2 weeks away from harvest or what will happen if it is left will it spread and rot. can it be slowed down ect

wozerishere · #8 (**permalink**) 08-28-2007, 03:01 PM

has anybody on this forum grown this strain befor and are there any other strains you can recoment im looking for a nice yield without a long veg time

wozerishere · #9 (**permalink**) 08-28-2007, 10:58 PM

/':bump:'/

wozerishere · #10 (**permalink**) 08-29-2007, 02:00 PM

this forum is so inactive

HydrOKuSh · #11 (**permalink**) 12-26-2007, 06:06 AM

post pics of your autopot grows!!! please .. i wanna just get a bunch of smartvalves.. get a tray and put a bunch of my own big pots in with the root control things,, and a rez above that smartvalve...post ur autopot pics!!

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Complete List of Cannabis Strains(and a lil more info;)	weed420	Recreational Marijuana Use	274	08-23-2008 11:37 PM
!!!!	namron_420s	Seasoned Tokers	71	06-04-2008 07:32 PM
Buying Seeds For My First Grow...	EuphoricNoni	Seed Banks	11	12-19-2006 10:46 AM
Strain Forgiveness	SourDiesel	Absolute Beginners	9	09-26-2006 12:44 AM
white widow seeds	jimmy_jimmy	Seed Banks	5	01-16-2005 06:20 AM

smoking and usage

chill out zone

marijuana growing

marijuana news and discussions

web site feedback

Site links

FAQ

Important

Extra

#1 (permalink) 08-25-2007, 12:07 PM
wozerishere Registered User Join Date: Jun 2007 Posts: 92	Nivana Seeds Snow White Grow HI I AM STARTING A DIARY OF MY SNOW WHITE GROW I ALREADY HAVE SEVEN OF THESE BABYS 5 WEKS INTO FLOWERING AND THERE LOOKING NICE BUT I Hve just bought some new equiptment and and are starting a new grow, equiptment is as follows: autopot 10 pot system 2 250w hps lights on light spinner {slowley roatates lights} got the enviroment now to make my babies happy also picked up one of them areophonic cloners does any one also no the correct ph for me to maintain for a coco grow as i havent grown coco befor or is there a better medium to use in the auto pots because iv heard alot about them overwatering but i was reasured by the guy in the shop that these are the new improved ones with a new smart valve to stop overwatering . pictures will be posted as i go along.

#2 (permalink) 08-25-2007, 10:15 PM
methaneorange Registered User Join Date: May 2007 Posts: 3	Not really answering your question but . . . If you're not able to get a good reply on this site. I see that icmag.com has an actual forum for coco coir growers that is pretty active. Would definitely check that out if I was in your place.

#3 (permalink) 08-25-2007, 11:38 PM
wozerishere Registered User Join Date: Jun 2007 Posts: 92	i have now changed my mind and bought a few bags of BioBizz PreMix soil byt the looks of it it looks to be alryt stuff hopeing for some serious growth this time as my other plants are only small just over a foot is the strain naturly small and bushy as i vedged for a good month.

#4 (permalink) 08-26-2007, 10:15 AM
psionblue Registered User Join Date: Apr 2007 Posts: 119	if you are using an autopot, make sure you out abount an inch of perlite at the bottom of the pot. __________________

#5 (permalink) 08-26-2007, 11:34 PM
wozerishere Registered User Join Date: Jun 2007 Posts: 92	how cum the perlite is needed to stop the plants soaking too much water up like a wick iv herd alot about overwater problems but iv been told other wise by the shop that the new smark valves do not overwater:s iv got the room set up not and have placed my 7 hand watered soil plants and two clones into 2 of the autopots would you advise using rockwool on cloned on a soil medium and waht sould i mantain my ph at its 6.5 at the moment

#6 (permalink) 08-27-2007, 09:45 PM
psionblue Registered User Join Date: Apr 2007 Posts: 119	Perlite helps drain and acts as a filter to the soil so it does not come out of the bottom. I also use root control fabric at the very bottom to prevent root clogs. The autopot instuctions online call for the perlite at the bottom. In soil I am running 6.5 - 6.7 in the autpots. My pots are very small (I made my own autopot system w/ the smartvalve) so I keep my nutes pretty high. So far so good. I don't put my plants in the autopot system until they are about 2-3" tall or so and then they are moved into 2.4 liter pots in the autopot trays. I have 2 plants per valve. i am going to coco for my next grow. It should be interesting. I don't know anything about rockwool, but do use rapid rooter and transplant those into soil. Can't be much different. One last thing, make sure your feed every day at 1/3 or 1/2 strength and work your way up. Also, put an airstone or pump or both in your reservoir to keep things circulated and aerated. I use both. Also, flush every 2-3 weeks to avoid salt buildup. good luck! __________________ Last edited by psionblue; 08-27-2007 at 10:06 PM.

#7 (permalink) 08-28-2007, 02:59 PM
wozerishere Registered User Join Date: Jun 2007 Posts: 92	how long do the cuttings usualy talk to root in aerophonic prop and what addatives do you recomend and what is the best way to remove powder mildew with out the chemicals as i am 2 weeks away from harvest or what will happen if it is left will it spread and rot. can it be slowed down ect

#8 (permalink) 08-28-2007, 03:01 PM
wozerishere Registered User Join Date: Jun 2007 Posts: 92	?? has anybody on this forum grown this strain befor and are there any other strains you can recoment im looking for a nice yield without a long veg time

#9 (permalink) 08-28-2007, 10:58 PM
wozerishere Registered User Join Date: Jun 2007 Posts: 92	/':bump:'/

#10 (permalink) 08-29-2007, 02:00 PM
wozerishere Registered User Join Date: Jun 2007 Posts: 92	this forum is so inactive

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)

#11 (permalink) 12-26-2007, 06:06 AM
HydrOKuSh Registered User Join Date: Jun 2007 Posts: 3	post pics of your autopot grows!!! please .. i wanna just get a bunch of smartvalves.. get a tray and put a bunch of my own big pots in with the root control things,, and a rez above that smartvalve...post ur autopot pics!!