Sobe Bottle Waterfall: Picture and test How-to guide.

[ptrckroe]

I made one of these and it worked good as hell +rep

[zalzal010]

waterfall bongs are awesome. I never went with glass though.

Whenever I was wanting to switch things up from the normal 'bong rips all night' thing, I'd just get a decent sized plastic waterbottle, and burn the 1 hole on the bottom and burn another hole in the lid. I'd use a little socket from a socket wrench kit for the bowl.

I remember I read about it somewhere on the internet, used it, and liked it. Super thick yellow smoke on the first try, and that was when I was still gettin into smokin alot. I'll tell ya, that first waterfall hit can be suprising, extremely potent. A little bit harsh - but I compensated by making the drain hole bigger so the water goes faster.

[TheBlueBeast]

All this talk got me setting mine up in a minute for a sesh. Thanks again Bobbert!

[Pot McSmoky]

the thing is i dont got a bong slide... how can i make one of these with out a bong slide?

[Bobbert]

Originally Posted by Pot McSmoky

the thing is i dont got a bong slide... how can i make one of these with out a bong slide?

Use something from home depo or hardware supply place. Look for a nut or something that looks like a bowl.

[Ars moriendi]

Buy one of those brass hose sprayers

The screw on bit has 2 holes and it'll work just fine as a bowl...you may wanna look around and find a brass nippe that fits it to make the bowl deeper tho

[zalzal010]

SMALL SOCKET FROM YO' DADDIES SOCKET WRENCH KIT.

I repeat - A small socket will serve as a bowl perfectly. It was the only thing we used for a long time before we started buying glass.

http://www.tooldesk.com/newimages/sktools.jpg

the small ones in that pic are perfect - Ive never seen a socket that didn't have a hole straight through it, and the small ones have a lip kinda thing so they dont slip down through the hole, youll see what I mean if you bust out the toolbox.

[Bobbert]

that is what i was talking about but could not remember the names.

[weedseed]

i did that same thing about 5 years ago but not because my bong broke.

i took some old hennessy VSOP and crystal bottles and took a dremel kit (used to drill glass)

and drilled a hole where you chizzled yours with a knife and stuck my stem/bowl in there with a rubber O ring and hit it from the top like i do with any bong. liquor bottles work awesome and they look nice when done properly...dremel kits can be purchased for about 40$

[Ars moriendi]

Originally Posted by weedseed

i did that same thing about 5 years ago but not because my bong broke.

i took some old hennessy VSOP and crystal bottles and took a dremel kit (used to drill glass)

and drilled a hole where you chizzled yours with a knife and stuck my stem/bowl in there with a rubber O ring and hit it from the top like i do with any bong. liquor bottles work awesome and they look nice when done properly...dremel kits can be purchased for about 40$

You get better cuts with tile bits a vice a decent impact drill and some ky jelly

If you wanna make straight up gravity bongs outta nice booze bottles you can either use a mid sized tile saw taking it slow to cut the bottom off or use the link I posted previously to make it fracture on a line for a clean break

Anyway ya slice it..busting out a drill and some old bottles is fun

Last bong I made was outta a snappes bottle that was sorta shaped like an upside down hookah bowl

[Blueflame1986]

so will a smaller choke hole make it easier to get your bowl rolling good?

[bobtoke]

you could also make a killer pipe by just inhaling out of that hole


also bobbert that looks like some yummy bud is that a yellow hair i see?

[tbs0015]

I used mine for the first time yesterday. Took two hits of some chronic and i was done. Haha, me and two of my buds were standing in the bathroom and i was like "alright, pack the bowl again" and we all said yeah, and then just stood there for like ten minutes waiting for someone to pack the next bowl because we were all too high to do it ourselves...good times

*edit* thought id add in, clean up your hole as best you can, i found a nasty slice in my finger from covering the hole.

[Ars moriendi]

Originally Posted by tbs0015

I used mine for the first time yesterday. Took two hits of some chronic and i was done. Haha, me and two of my buds were standing in the bathroom and i was like "alright, pack the bowl again" and we all said yeah, and then just stood there for like ten minutes waiting for someone to pack the next bowl because we were all too high to do it ourselves...good times

*edit* thought id add in, clean up your hole as best you can, i found a nasty slice in my finger from covering the hole.

Come on dude... why are you following this guide? It's flawed on a long term use level

If you're just fucking with gbongs i guess it's cool but if you hit them daily for personal reasons you'll be much better off with some thick ass booze bottle (any of the Bacardi oval bottles work really well) a couple different sized tile or glass spade or ball bits for your drill

Clamp the bottle in place bottom up with some clothe in whatever the vice is

some sorta lube be it ky gel or water in a playdoh/clay mote around the whole to keep the water on it at all times

Follow in between the cardi bottles lil dots with the holes...maybe 4 cig size or bigger holes even as you can

I picked up a 12mm slide and a downstem which fits perfect in the cardi bottles top when you rubberband a thin layer of paper round the upper part so it slides in solid

Bet most of you won't be walking after clearing a single cardi bottle waterfall

[boredjim8]

Originally Posted by bobtoke

you could also make a killer pipe by just inhaling out of that hole

well me and my frind did this.. took a PLASTIC watter bottle.. friends bubbler slide.. lighter .. lit a small hole in the very bottem of the bottle for the shotgun .. turned the bottle on its side and made a small hole for the bowl stem to fit in and slide in and out (after making tinny bongs making a hole perfect is ez but first few times u might make odd shaped holes that fuck up and are not air tight!) just unscrew the cap and toss it. So you have 3 holes the top (comes pre-holed..) bottem (for shotgun) and the part where u put the bowl on the side .. light up release shotgun and its like a home made steamroller in a way.. they hit just as good.. if not better than this cause the smoke doesnt go stale