Tylenol 3

[lilstoner]

hey, my friend wants to try taking tylenol 3 to get high and wants me to try it with him. What i wanna kno it how many T3\s should u take to get a good high, wahts the high like/how long and is it safe to do? thx in advance

[J-Pimp.]

i would not advice poppin T3s recreationally. They are essentially acetimetophine, caffeine and codeine. none of which are what i would condider a recreational drug

[GreenLantern420]

Originally Posted by J-Pimp.

i would not advice poppin T3s recreationally. They are essentially acetimetophine, caffeine and codeine. none of which are what i would condider a recreational drug

I agree.

EDIT: There's realoly caffeine in them? Huh, I never knew that

[d4rkw0lf]

Hey its T3's that have Codeine in them?


Fuck man, use cold water extraction, get the Codeine.

Codeines a nice high.

[bigorange2]

Yea i've heard of people doing water extraction on T3's to get the codein out. As for the high, i couldn't tell you how good it is, but I hear about people getting high off of it all the time, so i dont know. But then again, you hear people getting high off meth all the time too, and the meth high isn't so great, and i know this...

[LegitBaller]

codeine's the bomb, get some pure codeine if you wanna lean, preferably with prometh
if thats not n option, do a coldwater extraction like dude said, otherwise you cant pop more then like, 6-7 t3's without potentially damaging your liver from the acetminophine, and that will get you high but you wont be leanin to the left like homeboy 'screw
stay sittin sidewayz
peace

[bigorange2]

Yes, acetminophine will get you high, I've been high off of it, and let me tell you it's extremely uncomfortable, you don't want a acetminophine high!

[fAKdded]

down the hatch Perocet 10s

[lilstoner]

alright thx guys, ive trying to be reading up on it too, and msot people say the high isnt all that great so ill probably save my liver some damage

[br3ad_]

So, how do you do the extraction?

[GreenLantern420]

You can extract Codeine, hydrocodone, Oxycodone etc. almost any Rx narcotic with water as because they are soluable in water.
Cold water extraction works well.
Below is an example of a codeine extraction.
The idea behind the following extraction is that
acetaminophen and aspirin (I'll use A/A from now on) are very
_insoluble_ in cold water. Codeine phosphate (the most common
salt of codeine) is very _soluble_ in water including cold water.
The following table explains:

Solubility (31C water) Solubility (21C water)

Aspirin 1g / 100 ml 1g / 300ml

Acetaminophen 1g / 70 ml 1g / 150 ml

Codeine 1g / 2.3 ml 1g / 0.7 ml
Phosphate

So as you can see, both A/A aren't very soluble in 21C
water, so if you cool the water to around 10C, the solubility will
drop even further. That way you can dissolve 20 tablets in 50ml
of hot water, cool the water down to 10C, filter the solution and
end up with the same amount of codeine as the tablets contained
but only a fraction of the original amount of A/A.

[...]

1. Obtain a quantity of tablets containing codeine, check to
see if they contain anything other than codeine, caffeine,
acetaminophen or aspirin. If they do, and you don't know whether
or not it will be a problem, your best bet is not to use them.
Measure out your desired amount of codeine (ex. 64 mg = 8 tablets
* 8mg/tablet). You may want to add 2 extra tablets as it is quite
likely you will lose some codeine in the procedure. As you get
more experience with the procedure you will be able to get
approx. 95% of the codeine extracted.

2. Measure out some nice hot water, use approx. 40ml / 20 tablets
or more if needed. I would suggest you don't go over 50ml for 20
tablets. I don't know if the use of boiling water would destroy
any of the codeine but your best bet is not to use it. Use hot
water but not boiling. Make sure the tablets dissolve completely.
Some dissolve on contact with water while others need some help
dissolving by crushing them. Note : not all of the tablet will
dissolve, there are water-insoluble fillers in the tablet and not
all of the A/A will dissolve either(which is what we want).

3. Place the solution in a cold bath, I just use some ice cubes
in a container of water. Stir the mixture occasionally until the
solution drops to about 15C or lower. You won't need a
thermometer to measure the temperature, just make sure it's
"cold". This will take about 30 min. If you wish to speed this
up, you can use less water to dissolve the tablets, and add ice
chips to cool the mixture faster. Just make sure you don't add
so much ice that you drastically increase the volume of the mixture.

4. Filter the solution using whatever you have. Coffee filters
work well, but lab filters work the best. Just make sure you
don't end up with obvious solids in the filtered solution. This
will take about 1 hr. You may also want to rinse the solids left
over in the filter with some ice-water to extract any remaining
codeine.


Side notes Pretty much anything that CAN be used IV is better if you shoot it. Snorting, on the other hand, in addition to being horrible for your sinuses, is wasteful, and just doesn't work as well. Why? Beats me. I'm only speaking from my own, and many others experience.
Don't use alot of water, use as little as possible. Codeine,hydrocodone, Oxycodone and morphine are all sensitive to heat and light. (Some more than others).
This method will work for oxycodone, but as a side note Percocet and most off-brands contain a relatively small amount of acetaminophen (about 350 mg or so) compared to the oxycodone (5 mg). Since oxycodone is very strong, 2 or 3 percs should have you feeling pretty darn good (as long as you don't have a huge tolerance). As a result, unless you are taking 10 or 15 percs per day, you needn't worry about acetaminophen ingestion.

http://www.neonjoint.com/drug_recipes/chapter11.html