I just recently revised my glass bottle bong. It started out as a starbucks frappucino bottle,which I made a hole into and in that hole I stuck the cork that contained a metal bowl and a plastic hose. This hose and bowl cork was a part of asmall jar pipe I purchased at my local head shop. My GF and I used this as a waterbong for a moment, Sure it worked and I got high, but the problem was that I kept choking on water, sine the cork did go in quite deep. also the stem was vway to short so I had to fill water decently high, which caused my choking.Plus there was no carb.
This was almost a year ago.

Flash foward to yesterday, I finally bought the glass bowl and slider to execute my plan. both costed me 10.81 total at my local headshop. So using an exacto knife, a cutting board (all from the one year of Pre architecture I took at the U.), and a pencil. I got another starbucks frapuccino lid, in which I drafted two openings, a large one for the slider stem, and a smaller one for the hose. in the larger hole I inserted. I used an exacto knife to make the openings, which turned out pretty well. The completed product turned out to be a starbucks frappuccino bottle, with a green hose and a 3 inch stem with a slide out bowl. It's quite stylish, yet inconspicuous, and small enough to hide into a bag. I have not smoked out of it yet.

Hopefully it will be effective in getting me the head numbing high, I would get from a more expensive bong, but I won't be disappointed if it doesn't, as long as it does its job. Who knew that that one year of Pre- Architecture would be useful for "other things"!

Well that's it for now.