So you want to grow Marijuana, your ?'s answered here.

[jcj77d]

Originally Posted by Manny_

was wonderin what u think a simple plant to grow would be? i dont want one thats gonna be really tall just one thats gonna be kinda small and thats ez to grow seeing it will be my 1st,...

id try lowryder 2, or masterlow, or try useing methods like topping, fimming, & lst (low stress training) to keep them short

[jcj77d]

Originally Posted by Rhaas2001

thanks for all the help guys. ill be looking to info on topping & fimming shortly. but i was wondering if any of you had an idea of how to water your plants when your out of town. ill be gone about 7 days. i will water them realy good before i leave but it need to be done about every 3 days. any ideas. thanks again

id try to use a 20oz or bigger bottle, & put a small hole in the cap to fit a fish tank air hose in, & place the hose in the pot, & put a tiny tiny (small as u can get) hole @ the bottom of bottle, & hang the bottle up. u want it to drip out of the hose slowly, so do a little testing, u many not even need the other hole, but u might have to plug the end of hose & put tiny pin holes along the part thats going to be in medium, the higher u hang it the faster it will drip, experiment & see what works best.

[jcj77d]

Originally Posted by JarvisINC

Im currently growing 4-6 White Widow plants...

around how much can i expect to yield?

what type of lights, watts, lumens, pot size. but id say 1oz per

[jcj77d]

Originally Posted by SATORIskate

I am looking to spend around $500 on an indoor hydroponic grow room/cabinet/tent/whateverworks. Could I get some suggestions on grow systems and equipment that would be needed? Id search but I'm faded..

Thanks!!

try www.htgsupply.com & look @ their stuff, if more help needed come back

[jcj77d]

Originally Posted by Fatt Daddy

i have a space that is 24 inches high 28 inches deep front to back and 18 inches wide. please help me with some strains that i could grow besided lowryder that will give me a nice yield and height but also fit into my space.

well u got lowryder 2, & masterlow, but u can keep a plant short by useing methods like, topping, fimming, lst (low stress training), or start 12/12 from seed.

[bpo]

hey jdj, appreciate all the help your giving out and i have a question..

i'm currently growing 4 white widows from marijuana-seed.nl, they are on week 4 of flower and are budding very nicely, they are about 34" tall, in 3 gal pots, under a 400 watt hps and 250watt mh. you have any idea how much these would yield? i haven't been using any nutes as i am low on money, but next crop i am going all out and producing huge buds

[Dr_GreenThumb]

i have had my clones for about 2 - 3 days and the leaves are curling a little bit and the tips are beginning to discolor to a yellowish-green color.... and they are very droopy, a lot of the leaves are touching the dirt... What's wrong?

[Manny_]

Originally Posted by jcj77d

id try lowryder 2, or masterlow, or try useing methods like topping, fimming, & lst (low stress training) to keep them short

where can i find lowryder or masterlow?

[jcj77d]

Originally Posted by bpo

hey jdj, appreciate all the help your giving out and i have a question..

i'm currently growing 4 white widows from marijuana-seed.nl, they are on week 4 of flower and are budding very nicely, they are about 34" tall, in 3 gal pots, under a 400 watt hps and 250watt mh. you have any idea how much these would yield? i haven't been using any nutes as i am low on money, but next crop i am going all out and producing huge buds

thats a long shot, but id say maybe 1oz per. u can get nutes anywhere, walmart, lowes, etc, but since your into budding, u need a N-P-K ratio like 5-20-10, thats just a # i gave as an example, u want the 1st # lower, 2nd # highest, & 3rd # to be inbetween.

[jcj77d]

Originally Posted by Dr_GreenThumb

i have had my clones for about 2 - 3 days and the leaves are curling a little bit and the tips are beginning to discolor to a yellowish-green color.... and they are very droopy, a lot of the leaves are touching the dirt... What's wrong?

have your clones rooted, if not, they need to be foliar feed. if so it may be over/under watering or lake of nutes. any pics

[jcj77d]

Originally Posted by Manny_

where can i find lowryder or masterlow?

www.drchronic.com

[SATORIskate]

Thanks for the site recomendation! I plan on purchasing the Complete 400 Watt Soil Grow Tent System and some Skunk #1 indoor seeds from grasscity. How does that sound? Am I going to need to make any other purchases to make this work out?

Thanks so much! Sorry for being a newb

peace!

[TushaR]

back again, would a clear cup help for the first few weeks cause of more light exposure? j\w

and thanks for dealing with me

[suspect]

Hey J, theres a new foliar spray product out called "Liquid Light". its a 2 part formula that requires the first part of the application to be a penetrator, which I guess you let set & dry before spraying on the actual Liquid Light.
(made by Advanced nutrients, I think)
Anyhow, I was just wondering if you'd heard or had any first hand info to shoot my way?

[ocitown]

Originally Posted by bpo

hey jdj, appreciate all the help your giving out and i have a question..

i'm currently growing 4 white widows from marijuana-seed.nl, they are on week 4 of flower and are budding very nicely, they are about 34" tall, in 3 gal pots, under a 400 watt hps and 250watt mh. you have any idea how much these would yield? i haven't been using any nutes as i am low on money, but next crop i am going all out and producing huge buds

Now is a great time to give nutes like JCJ said,also check to see if the root ball is bound up at all,if so move um to 5 gal buckets. Even if you only add nutes to one plant,do it NOW and youll see a dif. and prolly really be suprized too.And plaese give us the feed back so everyone can learn.