|
Get yourself a 2x4......put the 2x4 over the top of the fish tank....where the lid would go....in the middle.....then cut 4 evenly spaces holes about 3 in in diameter in the wood all the way through.....then fill your fish tank with 5 gallons of water......now get a WATER pump......wether its a fish tank filter pump, or a water pump you go to the Pond and Garden store to buy it diesnt matter....with this WATER pump in hand you make it so the pump is pumping water from the bottom of your fish tank to all of the holes in the wood...this is where your plants will be.....the water will go back down into the fish tank from the water pumping through the holes in the wood where you will put your clones or plants in......try to think real hard about how this would look...as it is much easier to think of than i thought it took..... After all this is done...you have your pump in pumping water through the holes in the wood your cut and wehre your plants are you gotta buy nutes.....either find a hydro store or go online and buy Fox Farm GROW BIG HYDRO...Big Bloom....and Tiger Bloom....they are all liquid nutrients and will tell you what they come in and how much they cost...note they are 3 seperate bottles.....online they also give you a feeding schedule....for your first time just feed as the schedule tells you....mix nutes in water in fish tank for needed amounts and let pump run... shut it off during the night for like 6-7 hours if it gets to hot in the tank but that is not necessary....feed as needed...and run plants light schedule as needed and you will grow happy plants with little to no effort....I know its a lot to take in but....its cheap....easy...as its hydro...if you can build it from what i said and follow the directions on the nutrients you will be smoking like a king!....
|