Quote:
Originally Posted by dokholidae  Sounds good, although I don't recommend the scrubber for intake, just only for exhaust. You'e only bringing in fresh air inside via the intake, not pushing it out so the scrubber would not be necessary. The only caveat would be if there was a leak from inside the box, coming out from the intake which I don't think is possible.
Also, I believe there's a general rule of thumb where when you have one single intake, you need to have 2x the size of the intake. so, 1 fan intake, two fans exhaust. |
Yeah i was only going to use the scrubber for exhaust. In my post I mentioned I have 4 total 2 wrapped in a carbon fiber sheet, 1 for intake, and 1 inside the box for a breeze on the stems.
I figured i needed a bigger exhaust then intake but I didn't know if it really mattered so that confirmation is good.
Also I might just end up cutting 2 circles for exhaust in my box screwing the fans to it and putting a 10in-8inch reducer over the fans and have carbon in the 8in section. Both setups are easy.