Grasscity.com Forums - View Single Post

NdicaBud · #3 (**permalink**) 05-19-2002, 08:18 PM

A good rule of thumb is to only load a breaker up to 80% of its capacity. On a 15-amp service with 14 gauge wire one should only load it up to 12 Amps MAX. Since most lights will draw 1 amp per 100 watts a 15-amp breaker can handle one 1000w light each. So a safe bet is no more than 4 250w on same 15amp circuit.....

#3 (permalink) 05-19-2002, 08:18 PM
NdicaBud Old School Stoner Join Date: Oct 2001 Location: Cheddarland Posts: 1,133	Also.. A good rule of thumb is to only load a breaker up to 80% of its capacity. On a 15-amp service with 14 gauge wire one should only load it up to 12 Amps MAX. Since most lights will draw 1 amp per 100 watts a 15-amp breaker can handle one 1000w light each. So a safe bet is no more than 4 250w on same 15amp circuit..... __________________ Newbie at Growing, try Grasscity sponsored FAQ's at www.overgrow.com/faq/browse.php Fight Against Cannabis Laws at norml.org Peace..with Bud...NOT...Police the Bud Last edited by NdicaBud; 05-19-2002 at 08:22 PM.